Cladding sheets

The trapezoidal sheet is a galvanised and pre-lacquered steel sheet with a thickness of 0.6 to 1 mm to which longitudinal trapezoidal ribs are made.

The galvanisation of these sheets consists of a zinc coating which gives them a high resistance to corrosion and therefore greater durability.
Trapezoidal steel sheets with 30 mm ribbing are the most commonly used in industrial installations and are the ideal cladding for both roofs and simple facades in constructions that do not require insulation.

• Length: Up to 13500 mm (up to 17500 mm with special transport)
• Thicknesses: 0.6, 0.7, 0.8 and 1 mm
• Useful width: 1000 mm

The mini-wave sheet is suitable for industrial enclosures on roofs or facades, depending on the customer's needs.

Its wavy finish achieves good aesthetic effects at low cost.

• Length: Up to 12000 mm (up to 17500 mm with special transport)
• Thicknesses: 0.6, 0.7, 0.8, 1 mm and 1.2 mm
• Useful width: 1000 mm

The collaborating slab is formed by a steel ribbed sheet profile (collaborating sheet) on which we pour the concrete and a distribution mesh in order to prevent cracking due to the effects of shrinkage and temperature. Both elements work in unison and the corrugated steel sheet acts as formwork and positive reinforcement.

• Length: up to 10000 mm
• Thicknesses: 0.8, 1 mm and 1.2 mm
• Edge height: 54, 60 and 80 mm

Pegaso sheet is a ribbed metal plate with right angles giving rectangular shapes. The main characteristic of this sheet is its high strength. For this reason, its main use is focused on metal carpentry and the manufacture of metallurgical products.
Pegaso sheet metal is ideal for a wide range of applications, including the manufacture of false ceilings, façades, industrial doors, enclosures, protective fencing, etc.

Details:

• Thickness: 1 mm
• Width: 1000mm
• Long: 6000mm
• Materials: Laminated / Galvanised